![]() ![]() In order to install a Brother scanner or printer/scanner combo you need the right driver. Edit the head of /etc/sane.d/nf and configure the following two lines:įirmware /usr/share/sane/snapscan/u176v046.bin.Search the firmware image on the Internet and download it to /usr/share/sane/snapscan/.Go to snapscan main page and see whether your scanner is supported and which firmware you need (e.g, u176v046.bin). ![]() $ lsusb Bus 002 Device 010: ID 04a5:20b0 Acer Peripherals Inc. Find out which model you own and take note of the USB ID:.If you own an USB scanner from Acer (now BenQ), you need to download a suitable firmware binary and configure /etc/sane.d/nf. Other users must first start EPSON Scanner Monitor in the Applications folder and then press the Start button to scan.Tip: USB autosuspend can be disabled manually, or using powertop, TLP, or Laptop Mode Tools. Also make sure you are logged on as the user who installed the scanner software. In Mac OS X, make sure you did not install the scanner software in Classic mode or run it in Classic mode. Also, make sure the desired button is selected in the Scanner events list box, and the desired application in the Send to this application list is selected. ![]() Also, make sure the desired button is selected in the Select an event list box, and Start this program is selected.Ĭlick the Events tab in your scanner’s Properties window and make sure the Disable device events check box is clear. Make sure your Windows system is set up for scanner events as follows:Ĭlick the Events tab in your scanner's Properties window and make sure Take no action is not selected. See the Start Here sheet for instructions. Make sure EPSON Scan is installed correctly. Pressing the Start Button Does Not Open the Correct Program ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |